From inside the vehicle, press and hold down the two outside buttons at the same time, releasing only when the Universal Home Remote indicator light begins to flash, after 20 seconds. This step will erase the factory settings or all previously programmed buttons.
Do not hold down the buttons for longer than 30 seconds and do not repeat this step to program the remaining two Universal Home Remote buttons. Hold the end of your hand-held transmitter about 3 to 8 cm 1 to 3 in away from the Universal Home Remote buttons while keeping the indicator light in view. The hand-held transmitter was supplied by the manufacturer of your garage door opener receiver motor head unit.
Time needed: 5 minutes. The vehicle will sound to indicate successful programming of the remote. If these programming instructions helped save you time and money, please consider sharing our website with friends and family so they can do the same.
Vehicle is now in Programming Mode. The vehicle will emit a sound indicating successful programming of the remote.
Time needed: 3 minutes. The key is now programmed to your vehicle. If it continues blinking, continue with the following steps. Press the "smart" button on your garage door motor. This is usually located near the antenna wire on the back of the unit.
Press and hold the Homelink button on your Cadillac system within 30 seconds of pressing the "smart" button. Release the button after 3 seconds and the indicator light should blink solid. If not, repeat this step up to three times until the light is solid and the programming is complete.
Duplicate keys are always a good idea — By an auto locksmith. Therefore, it is very important to make sure you have enough juice in the battery before starting the process. In case the battery dies during the process, the new master key will not program and you will have to start the procedure all over again.
While most Cadillac models can be programmed with this method, we would recommend verifying the type of key with a locksmith or an additional reliable source that it is the right key. You must have the right type of transponder key that matches your model and year.
Otherwise, the key will not program. You can check the right key for the exact make and model here. The process of making a duplicate key, when you already have one or more working keys is fairly easy and therefore we recommend doing so. Cadillac remote car keys, also known as key fobs, smart keys or push to start keys, are the latest generation of security car keys.
GM, and Cadillac models, of course, included, is the only manufacturer that allows self-programming for remote key fobs. There is, however, a difference between programming remote key fobs and regular transponder keys.
Below, we outlined a step by step process on how to program your new remote key fob. Simply follow the steps and have your new remote ready to go in no time!
Take the emergency key out of the remote and insert it into the bottom of the plastic cover, located at the bottom of the door lock cylinder on the driver side door lock. You can see an example below. Step by step how to program Cadillac remote — Emergency key. The following step should be done within 10 seconds — turn the emergency key six times to the left — that would be counter-clockwise.
The message usually stays on for about 20 or 30 seconds. Push it once. It can take about 10 minutes to appear, depends on your make and model. Put the first remote you would like to program in the cup holder or in the armrest.
It depends on your make and model. If you are not sure, you can ask the dealer where is it located. Below is an example:. Once the remote is in the right place, press again on the push to start button. The first remote is programmed and ready to go.
0コメント